Page History

Do not call non-reentrant Call only asynchronous-safe functions within signal handlers. This could result in several issues, including heap damage and semantic vulnerabilities.. For strictly conforming programs, only the C standard library functions abort(), _Exit(), quick_exit(), and signal() can be safely called from within a signal handler. 

The C Standard, 7.14.1.1, paragraph 5 [ISO/IEC 9899:2011], states that if the signal occurs other than as the result of calling the abort() or raise() function, the behavior is undefined if

...the signal handler calls any function in the standard library other than the abort function, the _Exit function, the quick_exit function, or the signal function with the first argument equal to the signal number corresponding to the signal that caused the invocation of the handler.

Implementations may define a list of additional asynchronous-safe functions. These functions can also be called within a signal handler. This restriction applies to library functions as well as application-defined functions.

According to the C Rationale, 7.14.1.1 [C99 Rationale 2003],According to the "Signals and Interrupts" section of the C99 Rationale:

When a signal occurs, the normal flow of control of a program is interrupted. If a signal occurs that is being trapped by a signal handler, that handler is invoked. When it is finished, execution continues at the point at which the signal occurred. This arrangement could can cause problems if the signal handler invokes a library function that was being executed at the time of the signal. Since library functions are not guaranteed to be reentrant, they should not be called from a signal handler that returns.

And according to the OpenBSD signal() man page

The following functions are either reentrant or not interruptible by sig-
nals and are asyncronous-signal safe. Therefore applications may invoke
them, without restriction, from signal-catching functions:

Base Interfaces:

_exit(), access(), alarm(), cfgetispeed(), cfgetospeed(), cfsetispeed(),
cfsetospeed(), chdir(), chmod(), chown(), close(), creat(), dup(),
dup2(), execle(), execve(), fcntl(), fork(), fpathconf(), fstat(),
fsync(), getegid(), geteuid(), getgid(), getgroups(), getpgrp(),
getpid(), getppid(), getuid(), kill(), link(), lseek(), mkdir(),
mkfifo(), open(), pathconf(), pause(), pipe(), raise(), read(), rename(),
rmdir(), setgid(), setpgid(), setsid(), setuid(), sigaction(),
sigaddset(), sigdelset(), sigemptyset(), sigfillset(), sigismember(),
signal(), sigpending(), sigprocmask(), sigsuspend(), sleep(), stat(),
sysconf(), tcdrain(), tcflow(), tcflush(), tcgetattr(), tcgetpgrp(),
tcsendbreak(), tcsetattr(), tcsetpgrp(), time(), times(), umask(),
uname(), unlink(), utime(), wait(), waitpid(), write().

Non-Compliant Coding Example

Using the longjmp function inside a signal handler is particularly dangerous, as it could call any part of your code.

#include <setjmp.h> 
#include <signal.h> 
 
static jmp_buf env; 
 
void int_handler() { 
  longjmp(env, 1); 
} 
 
int main() { 
  char *foo; 

  signal(SIGINT, int_handler); 
 
  if(setjmp(env) == 0) { 
    foo = malloc(15);
    foo = "Nothing yet.";
  }
  else {
    foo = "Signal caught.";
  }

  /* main loop which displays foo */

  return 0;
}

Compliant Solution

Signal handlers should be as minimal as possible, only unconditionally setting a flag where appropriate, and returning.

In general, it is not safe to invoke I/O functions from within signal handlers. Programmers should ensure a function is included in the list of an implementation's asynchronous-safe functions for all implementations the code will run on before using them in signal handlers.

Noncompliant Code Example

In this noncompliant example, the C standard library functions fputs() and free() are called from the signal handler via the function log_message(). Neither function is asynchronous-safe.

#include <signal.h>
#include <stdio.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
char *info = NULL;

void log_message(void) {
  fputs(info, stderr);
}

void handler(int signum) {
  log_message();
  free(info);
  info = NULL;
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  info = (char *)malloc(MAXLINE);
  if (info == NULL) {
    /* Handle Error */
  }

  while (1) {
    /* Main loop program code */

    log_message();

    /* More program code */
  }
  return 0;
}

Compliant Solution

Signal handlers should be as concise as possible—ideally by unconditionally setting a flag and returning. This compliant solution sets a flag of type volatile sig_atomic_t and returns; the log_message() and free() functions are called directly from main():

#include <signal.h>
#include <stdio.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
volatile sig_atomic_t eflag = 0;
char *info = NULL;

void log_message(void) {
  fputs(info, stderr);
}

void handler(int signum) {
  eflag = 1;
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  info = (char *)malloc(MAXLINE);
  if (info == NULL) {
    /* Handle error */
  }

  while (!eflag) {
    /* Main loop program code */

    log_message();

    /* More program code */
  }

  log_message();
  free(info);
  info = NULL;

  return 0;
}

Noncompliant Code Example (longjmp())

Invoking the longjmp() function from within a signal handler can lead to undefined behavior if it results in the invocation of any non-asynchronous-safe functions. Consequently, neither longjmp() nor the POSIX siglongjmp() functions should ever be called from within a signal handler.

This noncompliant code example is similar to a vulnerability in an old version of Sendmail [VU #834865]. The intent is to execute code in a main() loop, which also logs some data. Upon receiving a SIGINT, the program transfers out of the loop, logs the error, and terminates.

However, an attacker can exploit this noncompliant code example by generating a SIGINT just before the second if statement in log_message(). The result is that longjmp() transfers control back to main(), where log_message() is called again. However, the first if statement would not be executed this time (because buf is not set to NULL as a result of the interrupt), and the program would write to the invalid memory location referenced by buf0.

#include <setjmp.h>
#include <signal.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
static jmp_buf env;

void handler(int signum) {
  longjmp(env, 1);
}

void log_message(char *info1, char *info2) {
  static char *buf = NULL;
  static size_t bufsize;
  char buf0[MAXLINE];

  if (buf == NULL) {
    buf = buf0;
    bufsize = sizeof(buf0);
  }

  /*
   * Try to fit a message into buf, else reallocate
   * it on the heap and then log the message.
   */

  /* Program is vulnerable if SIGINT is raised here */

  if (buf == buf0) {
    buf = NULL;
  }
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  char *info1;
  char *info2;

  /* info1 and info2 are set by user input here */

  if (setjmp(env) == 0) {
    while (1) {
      /* Main loop program code */
      log_message(info1, info2);
      /* More program code */
    }
  } else {
    log_message(info1, info2);
  }

  return 0;
}

Compliant Solution

In this compliant solution, the call to longjmp() is removed; the signal handler sets an error flag instead:

#include <signal.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
volatile sig_atomic_t eflag = 0;

void handler(int signum) {
  eflag = 1;
}

void log_message(char *info1, char *info2) {
  static char *buf = NULL;
  static size_t bufsize;
  char buf0[MAXLINE];

  if (buf == NULL) {
    buf = buf0;
    bufsize = sizeof(buf0);
  }

  /*
   * Try to fit a message into buf, else reallocate
   * it on the heap and then log the message.
   */
  if (buf == buf0) {
    buf = NULL;
  }
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  char *info1;
  char *info2;

  /* info1 and info2 are set by user input here */

  while (!eflag) {
    /* Main loop program code */
    log_message(info1, info2);
    /* More program code */
  }

  log_message(info1, info2);

  return 0;
}

Noncompliant Code Example (raise())

In this noncompliant code example, the int_handler() function is used to carry out tasks specific to SIGINT and then raises SIGTERM. However, there is a nested call to the raise() function, which is undefined behavior.

#include <signal.h>
#include <stdlib.h>
 
void term_handler(int signum) {
  /* SIGTERM handler */
}
 
void int_handler(int signum) {
  /* SIGINT handler */
  if (raise(SIGTERM) != 0) {
    /* Handle error */
  }
}
 
int main(void) {
  if (signal(SIGTERM, term_handler) == SIG_ERR) {
    /* Handle error */
  }
  if (signal(SIGINT, int_handler) == SIG_ERR) {
    /* Handle error */
  }
 
  /* Program code */
  if (raise(SIGINT) != 0) {
    /* Handle error */
  }
  /* More code */
 
  return EXIT_SUCCESS;
}

Compliant Solution

In this compliant solution, int_handler() invokes term_handler() instead of raising SIGTERM: 

#include <signal.h>
#include <stdlib.h>
 
void term_handler(int signum) {
  /* SIGTERM handler */
}
 
void int_handler(int signum) {
  /* SIGINT handler */
  /* Pass control to the SIGTERM handler */
  term_handler(SIGTERM);
}
 
int main(void) {
  if (signal(SIGTERM, term_handler) == SIG_ERR) {
    /* Handle error */
  }
  if (

#include <setjmp.h> 
#include <signal.h> 
 
static jmp_buf env; 
int interrupted = 0;
 
void int_handler() { 
  interrupted = 1;
} 
 
int main() { 
  char *foo; 

  signal(SIGINT, int_handler); 
    == SIG_ERR) {
  foo = malloc(15);
  foo = "Nothing yet.";
  /* Handle error */
  }
 
  /* mainProgram loop which displays foo code */
  if (raise(interruptSIGINT) !== 10) {
    foo/* =Handle "Signal caught.";error */
  }
  /* More code */
 
  return 0EXIT_SUCCESS;
}

Risk Assessment

Implementation Details

POSIX

The following table from the POSIX standard [IEEE Std 1003.1:2013] defines a set of functions that are asynchronous-signal-safe. Applications may invoke these functions, without restriction, from a signal handler.

All functions not listed in this table are considered to be unsafe with respect to signals. In the presence of signals, all POSIX functions behave as defined when called from or interrupted by a signal handler, with a single exception: when a signal interrupts an unsafe function and the signal handler calls an unsafe function, the behavior is undefined.

The C Standard, 7.14.1.1, paragraph 4 [ISO/IEC 9899:2011], states

If the signal occurs as the result of calling the abort or raise function, the signal handler shall not call the raise function.

However, in the description of signal(), POSIX [IEEE Std 1003.1:2013] states

This restriction does not apply to POSIX applications, as POSIX.1-2008 requires raise() to be async-signal-safe.

See also undefined behavior 131. 

OpenBSD

The OpenBSD signal() manual page lists a few additional functions that are asynchronous-safe in OpenBSD but "probably not on other systems" [OpenBSD], including snprintf(), vsnprintf(), and syslog_r() but only when the syslog_data struct is initialized as a local variable.

Risk Assessment

Invoking functions that are not asynchronous-safe from within a signal handler is undefined behaviorDepending on the code, this could lead to any number of attacks, many of which could give root access. For an overview of some software vulnerabilities, see Zalewski's signal article.

References

Automated Detection

Related Vulnerabilities

For an overview of software vulnerabilities resulting from improper signal handling, see Michal Zalewski's paper "Delivering Signals for Fun and Profit" [Zalewski 2001].

CERT Vulnerability Note VU #834865, "Sendmail signal I/O race condition," describes a vulnerability resulting from a violation of this rule. Another notable case where using the longjmp() function in a signal handler caused a serious vulnerability is wu-ftpd 2.4 [Greenman 1997]. The effective user ID is set to 0 in one signal handler. If a second signal interrupts the first, a call is made to longjmp(), returning the program to the main thread but without lowering the user's privileges. These escalated privileges can be used for further exploitation.

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

Key here (explains table format and definitions)

Bibliography

...

Image Added Image Added Image Added

adjust column widths Wiki Markup\[[ISO/IEC 03|AA. C References#ISO/IEC 03]\] "Signals and Interrupts" \[[Open Group 04|AA. C References#Open Group 04]\] [longjmp|http://www.opengroup.org/onlinepubs/000095399/functions/longjmp.html] \[OpenBSD\] [{{signal()}} Man Page|http://www.openbsd.org/cgi-bin/man.cgi?query=signal] \[Zalewski\] [http://lcamtuf.coredump.cx/signals.txt]