This coding standard is organized into 11 chapters that contain rules in specific topic areas followed by four appendices. Appendix A contains the bibliography. Appendix B lists the definitions of terms used throughout the standard. Appendix C lists the relationships between the rules of this standard and two other related guidelines: MISRA C++ 2008: Guidelines for the Use of the C++ Language in Critical Systems [MISRA 2008] and MITRE's Common Weakness Enumeration (CWE) [MITRE 2010]. Appendix D lists the risk assessments associated with all of the rules in the coding standard.

Most rules have a consistent structure. Each rule in this standard has a unique identifier, which is included in the title. The title and the introductory paragraphs define the rule and are typically followed by one or more pairs of noncompliant code examples and compliant solutions. Each rule also includes a risk assessment, related guidelines, and a bibliography (where applicable). Rules may also include a table of related vulnerabilities.

Identifiers

Each rule and recommendation (see Rules Versus Recommendations) is given a unique identifier. These identifiers consist of three parts:

The three-letter mnemonic is used to group similar coding practices and to indicate which category a coding practice belongs to.

The numeric value is used to give each coding practice a unique identifier. Numeric values in the range of 00 to 49 are reserved for recommendations, and values in the range of 50 to 99 are reserved for rules. (The values used for the SEI CERT C Coding Standard are different.) Rules and recommendations are frequently referenced from the guidelines in this standard by their identifier and title. 

Here are some example identifiers with an explanation of each:

Noncompliant Code Examples and Compliant Solutions

Noncompliant code examples illustrate code that violates the guideline under discussion. It is important to note that these are only examples, and eliminating all occurrences of the example does not necessarily mean that the code being analyzed is now compliant with the guideline.

Noncompliant code examples are typically followed by compliant solutions, which show how the noncompliant code example can be recoded in a secure, compliant manner. Except where noted, noncompliant code examples should contain violations only of the guideline under discussion. Compliant solutions should comply with all of the secure coding rules but may on occasion fail to comply with a recommendation.

Coding Conventions

Unless otherwise specified, all code should compile on a reasonably modern compiler, when it is following compliance with the standard. For example, you can require GCC's g++ to conform to the C++11 standard with the parameter --std=c++11.

Code that is only expected to run on a particular subset of platforms should have those platforms mentioned in the code's section header, e.g.: Compliant Solution (POSIX). Likewise, code that is only expected to run on more modern versions of C++ should indicate the oldest standard that supports them, e.g.: Compliant Solution (C++14).

In order to compile the code, you will need to include appropriate header files. For example, if the code invokes malloc(), you may need to include the cstdlib header.

Many code examples will contain ellipsis in comments. This indicates that the comment may be replaced by arbitrary code that satisfies the comment. A comment with only ellipsis suggests that the code may do anything.

Proper error handling is a controversial subject, and many applications and libraries provide their own idiosyncratic error handling mechanisms. See Rule 08. Exceptions and Error Handling (ERR) for our guidelines on handling errors. When our code detects that an error condition might have occurred, and handling that error condition is not endemic to the guideline itself, we will use the comment: /* Handle Error */. This comment implies that the error is somehow addressed, so that the code does not fall through. The code may abort, or fix the error somehow. For example:

char *str = malloc(10);
if (str == NULL) {
  /* Handle Error */
}

/* ... str can not be NULL here. Work with str... */

Exceptions

Any rule or recommendation may specify a small set of exceptions detailing the circumstances under which the guideline is not necessary to ensure the safety, reliability, or security of software. Exceptions are informative only and are not required to be followed.

Risk Assessment

Each guideline in the CERT C++ Coding Standard contains a risk assessment section that attempts to provide software developers with an indication of the potential consequences of not addressing a particular rule or recommendation in their code (along with some indication of expected remediation costs). This information may be used to prioritize the repair of rule violations by a development team. The metric is designed primarily for remediation projects. It is generally assumed that new code will be developed to be compliant with the entire coding standard and applicable recommendations.

Each rule and recommendation has an assigned priority. Priorities are assigned using a metric based on Failure Mode, Effects, and Criticality Analysis (FMECA) [IEC 60812]. Three values are assigned for each rule on a scale of 1 to 3 for severity, likelihood, and remediation cost.

Severity—How serious are the consequences of the rule being ignored?

Value

Meaning

Examples of Vulnerability

1

Low

Denial-of-service attack, abnormal termination

2

Medium

Data integrity violation, unintentional information disclosure

3

High

Run arbitrary code

Likelihood—How likely is it that a flaw introduced by ignoring the rule can lead to an exploitable vulnerability?

Value

Meaning

1

Unlikely

2

Probable

3

Likely

Remediation Cost—How expensive is it to comply with the rule?

Value

Meaning

Detection

Correction

1

High

Manual

Manual

2

Medium

Automatic

Manual

3

Low

Automatic

Automatic

The three values are then multiplied together for each rule. This product provides a measure that can be used in prioritizing the application of the rules. The products range from 1 to 27, although only the following 10 distinct values are possible: 1, 2, 3, 4, 6, 8, 9, 12, 18, and 27. Rules and recommendations with a priority in the range of 1 to 4 are Level 3 rules, 6 to 9 are Level 2 , and 12 to 27 are Level 1 . The following are possible interpretations of the priorities and levels.

Priorities and Levels

Level

Priorities

Possible Interpretation

L1

12 , 18 , 27

High severity, likely, inexpensive to repair

L2

6 , 8 , 9

Medium severity, probable, medium cost to repair

L3

1 , 2 , 3 , 4

Low severity, unlikely, expensive to repair

Specific projects may begin remediation by implementing all rules at a particular level before proceeding to the lower priority rules, as shown in the following illustration:



Recommendations are not compulsory and are provided for information purposes only.

Automated Detection

On the wiki, both rules and recommendations frequently have sections that describe automated detection. These sections provide additional information on analyzers that can automatically diagnose violations of coding guidelines. Most automated analyses for the C++ programming language are neither sound nor complete, so the inclusion of a tool in this section typically means that the tool can diagnose some violations of this particular rule. The Secure Coding Validation Suite can be used to test the ability of analyzers to diagnose violations of rules from ISO/IEC TS 17961:2013, which is related to the rules in the SEI CERT C Coding Standard.

Related Vulnerabilities

The risk assessment sections on the wiki also contain a link to search for related vulnerabilities on the CERT website. Whenever possible, CERT Vulnerability Notes are tagged with a keyword corresponding to the unique ID of the coding guideline. This search provides you with an up-to-date list of real-world vulnerabilities that have been determined to be at least partially caused by a violation of this specific guideline. These vulnerabilities are labeled as such only when the vulnerability analysis team at the CERT/CC is able to evaluate the source code and precisely determine the cause of the vulnerability. Because many vulnerability notes refer to vulnerabilities in closed-source software systems, it is not always possible to provide this additional analysis. Consequently, the related vulnerabilities field tends to be somewhat sparsely populated.

Related vulnerability sections are included only for specific rules in this standard, when the information is both relevant and interesting.

Related Guidelines

The related guidelines sections contain links to guidelines in related standards, technical specifications, and guideline collections such as Information Technology—Programming Languages, Their Environments and System Software Interfaces—C Secure Coding Rules [ISO/IEC TS 17961:2013]; Information Technology—Programming Languages —Guidance to Avoiding Vulnerabilities in Programming Languages through Language Selection and Use [ISO/IEC TR 24772:2013]; MISRA C++ 2008: Guidelines for the Use of the C++ Language in Critical Systems [MISRA C++:2008]; and CWE IDs in MITRE’s Common Weakness Enumeration (CWE) [MITRE 2010].

You can create a unique URL to get more information on CWEs by appending the relevant ID to the end of a fixed string. For example, to find more information about "CWE-192: Integer Coercion Error," you can append 192.html to http://cwe.mitre.org/data/definitions/ and enter the resulting URL in your browser: http://cwe.mitre.org/data/definitions/192.html.

The other referenced technical specifications, technical reports, and guidelines are commercially available.

Bibliography

Most guidelines have a small bibliography section that lists documents and sections in those documents that provide information relevant to the guideline.