Skip to end of metadata
Go to start of metadata

This page was automatically generated and should not be edited.

The information on this page was provided by outside contributors and has not been verified by SEI CERT.

The table below can be re-ordered, by clicking column headers.

Tool Version: 9.7.1

Checker

Guideline

1 D MSC13-C. Detect and remove unused values
1 J MSC07-C. Detect and remove dead code
1 Q PRE31-C. Avoid side effects in arguments to unsafe macros
1 Q EXP30-C. Do not depend on the order of evaluation for side effects
1 Q FIO41-C. Do not call getc(), putc(), getwc(), or putwc() with a stream argument that has side effects
1 Q EXP02-C. Be aware of the short-circuit behavior of the logical AND and OR operators
1 Q EXP10-C. Do not depend on the order of evaluation of subexpressions or the order in which side effects take place
1 Q PRE12-C. Do not define unsafe macros
1 U MEM11-C. Do not assume infinite heap space
1 X DCL40-C. Do not create incompatible declarations of the same function or object
2 D MSC37-C. Ensure that control never reaches the end of a non-void function
2 X DCL36-C. Do not declare an identifier with conflicting linkage classifications
3 J MSC06-C. Beware of compiler optimizations
5 C MEM11-C. Do not assume infinite heap space
5 Q MSC15-C. Do not depend on undefined behavior
6 D MEM11-C. Do not assume infinite heap space
7 S ENV32-C. All exit handlers must return normally
8 D DCL22-C. Use volatile for data that cannot be cached
8 D MSC06-C. Beware of compiler optimizations
8 D MSC12-C. Detect and remove code that has no effect or is never executed
8 D MSC13-C. Detect and remove unused values
9 S PRE31-C. Avoid side effects in arguments to unsafe macros
9 S EXP30-C. Do not depend on the order of evaluation for side effects
9 S FIO41-C. Do not call getc(), putc(), getwc(), or putwc() with a stream argument that has side effects
11 S EXP15-C. Do not place a semicolon on the same line as an if, for, or while statement
11 S EXP19-C. Use braces for the body of an if, for, or while statement
12 S EXP15-C. Do not place a semicolon on the same line as an if, for, or while statement
12 S EXP19-C. Use braces for the body of an if, for, or while statement
15 D MSC13-C. Detect and remove unused values
17 D DCL40-C. Do not create incompatible declarations of the same function or object
17 D DCL23-C. Guarantee that mutually visible identifiers are unique
17 D MSC14-C. Do not introduce unnecessary platform dependencies
20 S DCL31-C. Declare identifiers before using them
21 S EXP37-C. Call functions with the correct number and type of arguments
21 S MSC40-C. Do not violate constraints
21 S DCL07-C. Include the appropriate type information in function declarators
24 D DCL31-C. Declare identifiers before using them
25 D DCL19-C. Minimize the scope of variables and functions
26 S MEM11-C. Do not assume infinite heap space
27 D DCL15-C. Declare file-scope objects or functions that do not need external linkage as static
28 D MEM11-C. Do not assume infinite heap space
30 S EXP30-C. Do not depend on the order of evaluation for side effects
30 S FIO41-C. Do not call getc(), putc(), getwc(), or putwc() with a stream argument that has side effects
35 D PRE31-C. Avoid side effects in arguments to unsafe macros
35 D EXP30-C. Do not depend on the order of evaluation for side effects
35 D FIO41-C. Do not call getc(), putc(), getwc(), or putwc() with a stream argument that has side effects
35 D EXP02-C. Be aware of the short-circuit behavior of the logical AND and OR operators
35 D EXP10-C. Do not depend on the order of evaluation of subexpressions or the order in which side effects take place
35 D PRE12-C. Do not define unsafe macros
35 S MSC06-C. Beware of compiler optimizations
36 S MSC37-C. Ensure that control never reaches the end of a non-void function
39 S FLP30-C. Do not use floating-point variables as loop counters
40 S DCL19-C. Minimize the scope of variables and functions
41 D DCL31-C. Declare identifiers before using them
41 D EXP37-C. Call functions with the correct number and type of arguments
41 S DCL10-C. Maintain the contract between the writer and caller of variadic functions
41 S DCL11-C. Understand the type issues associated with variadic functions
42 D DCL30-C. Declare objects with appropriate storage durations
42 D EXP35-C. Do not modify objects with temporary lifetime
42 S MSC14-C. Do not introduce unnecessary platform dependencies
43 D INT33-C. Ensure that division and remainder operations do not result in divide-by-zero errors
43 D FLP03-C. Detect and handle floating-point errors
43 S MSC22-C. Use the setjmp(), longjmp() facility securely
44 S EXP47-C. Do not call va_arg with an argument of the incorrect type
44 S MEM36-C. Do not modify the alignment of objects by calling realloc()
44 S FIO37-C. Do not assume that fgets() or fgetws() returns a nonempty string when successful
44 S FIO40-C. Reset strings on fgets() or fgetws() failure
44 S SIG35-C. Do not return from a computational exception signal handler
44 S ERR32-C. Do not rely on indeterminate values of errno
44 S ERR34-C. Detect errors when converting a string to a number
44 S CON33-C. Avoid race conditions when using library functions
44 S CON37-C. Do not call signal() in a multithreaded program
44 S MSC30-C. Do not use the rand() function for generating pseudorandom numbers
44 S MSC33-C. Do not pass invalid data to the asctime() function
44 S POS33-C. Do not use vfork()
44 S DCL03-C. Use a static assertion to test the value of a constant expression
44 S ERR01-C. Use ferror() rather than errno to check for FILE stream errors
44 S ERR06-C. Understand the termination behavior of assert() and abort()
44 S ERR07-C. Prefer functions that support error checking over equivalent functions that don't
44 S FIO03-C. Do not make assumptions about fopen() and file creation
44 S FIO05-C. Identify files using multiple file attributes
44 S FIO06-C. Create files with appropriate access permissions
44 S FIO09-C. Be careful with binary data when transferring data across systems
44 S FIO17-C. Do not rely on an ending null character when using fread()
44 S FIO18-C. Never expect fwrite() to terminate the writing process at a null character
44 S FIO19-C. Do not use fseek() and ftell() to compute the size of a regular file
44 S FIO20-C. Avoid unintentional truncation when using fgets() or fgetws()
44 S FIO21-C. Do not create temporary files in shared directories
44 S INT05-C. Do not use input functions to convert character data if they cannot handle all possible inputs
44 S MEM03-C. Clear sensitive information stored in reusable resources
44 S MEM05-C. Avoid large stack allocations
44 S MSC24-C. Do not use deprecated or obsolescent functions
44 S SIG00-C. Mask signals handled by noninterruptible signal handlers
44 S SIG02-C. Avoid using signals to implement normal functionality
44 S STR03-C. Do not inadvertently truncate a string
44 S STR07-C. Use the bounds-checking interfaces for string manipulation
45 D EXP34-C. Do not dereference null pointers
45 D ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
45 D ARR00-C. Understand how arrays work
45 D EXP08-C. Ensure pointer arithmetic is used correctly
47 S ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
47 S ARR00-C. Understand how arrays work
48 D FIO46-C. Do not access a closed file
48 D MSC15-C. Do not depend on undefined behavior
48 S MSC01-C. Strive for logical completeness
49 D FIO42-C. Close files when they are no longer needed
49 D FIO22-C. Close files before spawning processes
49 S EXP00-C. Use parentheses for precedence of operation
50 D MEM31-C. Free dynamically allocated memory when no longer needed
50 D MEM00-C. Allocate and free memory in the same module, at the same level of abstraction
50 D MEM12-C. Consider using a goto chain when leaving a function on error when using and releasing resources
50 S INT13-C. Use bitwise operators only on unsigned operands
50 S INT16-C. Do not make assumptions about representation of signed integers
51 D MEM30-C. Do not access freed memory
51 S INT34-C. Do not shift an expression by a negative number of bits or by greater than or equal to the number of bits that exist in the operand
52 S INT02-C. Understand integer conversion rules
53 D EXP33-C. Do not read uninitialized memory
53 D EXP08-C. Ensure pointer arithmetic is used correctly
54 D EXP08-C. Ensure pointer arithmetic is used correctly
54 S EXP44-C. Do not rely on side effects in operands to sizeof, _Alignof, or _Generic
56 S FLP02-C. Avoid using floating-point numbers when precise computation is needed
57 S MSC06-C. Beware of compiler optimizations
57 S MSC12-C. Detect and remove code that has no effect or is never executed
59 S MSC01-C. Strive for logical completeness
61 D DCL15-C. Declare file-scope objects or functions that do not need external linkage as static
61 D DCL19-C. Minimize the scope of variables and functions
61 X DCL23-C. Guarantee that mutually visible identifiers are unique
62 S MSC17-C. Finish every set of statements associated with a case label with a break statement
62 X MSC15-C. Do not depend on undefined behavior
63 D MSC15-C. Do not depend on undefined behavior
63 S DCL20-C. Explicitly specify void when a function accepts no arguments
63 X MSC15-C. Do not depend on undefined behavior
64 S MSC15-C. Do not depend on undefined behavior
64 X ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
64 X ARR38-C. Guarantee that library functions do not form invalid pointers
64 X ARR00-C. Understand how arrays work
65 D MSC06-C. Beware of compiler optimizations
65 D MSC12-C. Detect and remove code that has no effect or is never executed
65 S MSC15-C. Do not depend on undefined behavior
66 S MSC37-C. Ensure that control never reaches the end of a non-void function
66 X ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
66 X ARR38-C. Guarantee that library functions do not form invalid pointers
66 X STR31-C. Guarantee that storage for strings has sufficient space for character data and the null terminator
66 X ARR00-C. Understand how arrays work
67 X DCL02-C. Use visually distinct identifiers
68 X ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
68 X ARR38-C. Guarantee that library functions do not form invalid pointers
68 X ARR00-C. Understand how arrays work
69 D EXP33-C. Do not read uninitialized memory
69 S MSC14-C. Do not introduce unnecessary platform dependencies
69 X ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
69 X ARR38-C. Guarantee that library functions do not form invalid pointers
69 X ARR00-C. Understand how arrays work
70 X ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
70 X ARR38-C. Guarantee that library functions do not form invalid pointers
70 X STR31-C. Guarantee that storage for strings has sufficient space for character data and the null terminator
70 X ARR00-C. Understand how arrays work
71 S DCL30-C. Declare objects with appropriate storage durations
71 X ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
71 X ARR38-C. Guarantee that library functions do not form invalid pointers
71 X STR31-C. Guarantee that storage for strings has sufficient space for character data and the null terminator
71 X ARR00-C. Understand how arrays work
72 D EXP10-C. Do not depend on the order of evaluation of subexpressions or the order in which side effects take place
73 S INT12-C. Do not make assumptions about the type of a plain int bit-field when used in an expression
75 D FIO45-C. Avoid TOCTOU race conditions while accessing files
75 D FIO24-C. Do not open a file that is already open
76 D MSC06-C. Beware of compiler optimizations
76 S PRE05-C. Understand macro replacement when concatenating tokens or performing stringification
77 D DCL30-C. Declare objects with appropriate storage durations
77 D EXP35-C. Do not modify objects with temporary lifetime
77 S PRE02-C. Macro replacement lists should be parenthesized
78 D DCL00-C. Const-qualify immutable objects
78 S PRE01-C. Use parentheses within macros around parameter names
79 S PRE03-C. Prefer typedefs to defines for encoding non-pointer types
79 S PRE10-C. Wrap multistatement macros in a do-while loop
79 S PRE11-C. Do not conclude macro definitions with a semicolon
79 X ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
79 X ARR38-C. Guarantee that library functions do not form invalid pointers
80 D ERR33-C. Detect and handle standard library errors
80 D POS54-C. Detect and handle POSIX library errors
80 X INT33-C. Ensure that division and remainder operations do not result in divide-by-zero errors
81 D FIO08-C. Take care when calling remove() on an open file
81 S PRE07-C. Avoid using repeated question marks
82 D FIO44-C. Only use values for fsetpos() that are returned from fgetpos()
83 D FIO13-C. Never push back anything other than one read character
83 S DCL18-C. Do not begin integer constants with 0 when specifying a decimal value
84 D FIO39-C. Do not alternately input and output from a stream without an intervening flush or positioning call
84 D MSC15-C. Do not depend on undefined behavior
85 D FIO02-C. Canonicalize path names originating from tainted sources
85 S INT09-C. Ensure enumeration constants map to unique values
86 D FIO30-C. Exclude user input from format strings
86 S DCL37-C. Do not declare or define a reserved identifier
87 D SIG31-C. Do not access shared objects in signal handlers
88 D SIG30-C. Call only asynchronous-safe functions within signal handlers
89 D SIG30-C. Call only asynchronous-safe functions within signal handlers
93 D DCL00-C. Const-qualify immutable objects
93 S INT31-C. Ensure that integer conversions do not result in lost or misinterpreted data
93 S FLP34-C. Ensure that floating-point conversions are within range of the new type
93 S INT02-C. Understand integer conversion rules
93 S INT07-C. Use only explicitly signed or unsigned char type for numeric values
93 S STR04-C. Use plain char for characters in the basic character set
94 D MSC13-C. Detect and remove unused values
94 S EXP36-C. Do not cast pointers into more strictly aligned pointer types
94 S EXP39-C. Do not access a variable through a pointer of an incompatible type
96 S INT02-C. Understand integer conversion rules
96 S INT07-C. Use only explicitly signed or unsigned char type for numeric values
96 S MSC05-C. Do not manipulate time_t typed values directly
97 D SIG34-C. Do not call signal() from within interruptible signal handlers
97 D SIG01-C. Understand implementation-specific details regarding signal handler persistence
98 S EXP37-C. Call functions with the correct number and type of arguments
99 S EXP16-C. Do not compare function pointers to constant values
100 S MSC15-C. Do not depend on undefined behavior
101 S INT02-C. Understand integer conversion rules
101 S INT07-C. Use only explicitly signed or unsigned char type for numeric values
101 S MSC05-C. Do not manipulate time_t typed values directly
101 S STR04-C. Use plain char for characters in the basic character set
104 D DCL12-C. Implement abstract data types using opaque types
105 D MSC06-C. Beware of compiler optimizations
105 D MSC12-C. Detect and remove code that has no effect or is never executed
105 D MSC13-C. Detect and remove unused values
107 D ENV30-C. Do not modify the object referenced by the return value of certain functions
107 S INT02-C. Understand integer conversion rules
107 S MSC05-C. Do not manipulate time_t typed values directly
108 D STR02-C. Sanitize data passed to complex subsystems
109 D STR31-C. Guarantee that storage for strings has sufficient space for character data and the null terminator
109 D STR02-C. Sanitize data passed to complex subsystems
109 S MSC15-C. Do not depend on undefined behavior
111 D ERR30-C. Set errno to zero before calling a library function known to set errno, and check errno only after the function returns a value indicating failure
112 D MEM30-C. Do not access freed memory
112 D MEM01-C. Store a new value in pointers immediately after free()
113 D MSC15-C. Do not depend on undefined behavior
113 S MSC09-C. Character encoding: Use subset of ASCII for safety
114 S EXP45-C. Do not perform assignments in selection statements
114 S EXP20-C. Perform explicit tests to determine success, true and false, and equality
115 D MEM35-C. Allocate sufficient memory for an object
115 S STR03-C. Do not inadvertently truncate a string
118 S ENV31-C. Do not rely on an environment pointer following an operation that may invalidate it
119 S MSC04-C. Use comments consistently and in a readable fashion
120 D DCL13-C. Declare function parameters that are pointers to values not changed by the function as const
120 S INT13-C. Use bitwise operators only on unsigned operands
120 S INT16-C. Do not make assumptions about representation of signed integers
121 D ERR30-C. Set errno to zero before calling a library function known to set errno, and check errno only after the function returns a value indicating failure
122 D ERR30-C. Set errno to zero before calling a library function known to set errno, and check errno only after the function returns a value indicating failure
122 S ENV32-C. All exit handlers must return normally
123 D EXP34-C. Do not dereference null pointers
125 D MEM34-C. Only free memory allocated dynamically
125 S PRE05-C. Understand macro replacement when concatenating tokens or performing stringification
127 D INT33-C. Ensure that division and remainder operations do not result in divide-by-zero errors
127 S ARR02-C. Explicitly specify array bounds, even if implicitly defined by an initializer
128 D EXP34-C. Do not dereference null pointers
129 D EXP34-C. Do not dereference null pointers
130 D EXP34-C. Do not dereference null pointers
131 D EXP34-C. Do not dereference null pointers
131 S DCL01-C. Do not reuse variable names in subscopes
132 D ERR30-C. Set errno to zero before calling a library function known to set errno, and check errno only after the function returns a value indicating failure
132 S EXP45-C. Do not perform assignments in selection statements
133 D ENV34-C. Do not store pointers returned by certain functions
133 S EXP02-C. Be aware of the short-circuit behavior of the logical AND and OR operators
134 D ERR30-C. Set errno to zero before calling a library function known to set errno, and check errno only after the function returns a value indicating failure
134 S EXP30-C. Do not depend on the order of evaluation for side effects
134 S FIO41-C. Do not call getc(), putc(), getwc(), or putwc() with a stream argument that has side effects
134 S DCL17-C. Beware of miscompiled volatile-qualified variables
134 S EXP10-C. Do not depend on the order of evaluation of subexpressions or the order in which side effects take place
135 S DCL07-C. Include the appropriate type information in function declarators
136 S EXP46-C. Do not use a bitwise operator with a Boolean-like operand
139 S MSC07-C. Detect and remove dead code
139 S MSC12-C. Detect and remove code that has no effect or is never executed
140 S MEM11-C. Do not assume infinite heap space
140 S MSC07-C. Detect and remove dead code
140 S MSC12-C. Detect and remove code that has no effect or is never executed
145 S MSC40-C. Do not violate constraints
156 S MSC15-C. Do not depend on undefined behavior
157 S STR30-C. Do not attempt to modify string literals
159 S MEM10-C. Define and use a pointer validation function
170 S EXP37-C. Call functions with the correct number and type of arguments
170 S DCL07-C. Include the appropriate type information in function declarators
176 S MSC10-C. Character encoding: UTF8-related issues
200 S DCL00-C. Const-qualify immutable objects
201 S DCL06-C. Use meaningful symbolic constants to represent literal values
201 S EXP07-C. Do not diminish the benefits of constants by assuming their values in expressions
201 S EXP09-C. Use sizeof to determine the size of a type or variable
203 S EXP05-C. Do not cast away a const qualification
218 S DCL37-C. Do not declare or define a reserved identifier
219 S DCL37-C. Do not declare or define a reserved identifier
243 S PRE06-C. Enclose header files in an inclusion guard
245 S MSC20-C. Do not use a switch statement to transfer control into a complex block
248 S INT33-C. Ensure that division and remainder operations do not result in divide-by-zero errors
252 S DCL16-C. Use "L," not "l," to indicate a long value
296 S MSC15-C. Do not depend on undefined behavior
299 S DCL05-C. Use typedefs of non-pointer types only
302 S MSC04-C. Use comments consistently and in a readable fashion
323 S MSC40-C. Do not violate constraints
324 S MSC15-C. Do not depend on undefined behavior
326 S DCL31-C. Declare identifiers before using them
329 S INT07-C. Use only explicitly signed or unsigned char type for numeric values
329 S STR00-C. Represent characters using an appropriate type
329 S STR04-C. Use plain char for characters in the basic character set
329 S STR09-C. Don't assume numeric values for expressions with type plain character
331 S INT13-C. Use bitwise operators only on unsigned operands
332 S INT02-C. Understand integer conversion rules
334 S INT02-C. Understand integer conversion rules
335 S MSC15-C. Do not depend on undefined behavior
336 S MSC15-C. Do not depend on undefined behavior
339 S MSC15-C. Do not depend on undefined behavior
340 S PRE00-C. Prefer inline or static functions to function-like macros
341 S PRE32-C. Do not use preprocessor directives in invocations of function-like macros
344 S EXP32-C. Do not access a volatile object through a nonvolatile reference
345 S MSC40-C. Do not violate constraints
355 S DCL23-C. Guarantee that mutually visible identifiers are unique
361 S EXP00-C. Use parentheses for precedence of operation
376 S MSC10-C. Character encoding: UTF8-related issues
382 S EXP12-C. Do not ignore values returned by functions
385 S DCL41-C. Do not declare variables inside a switch statement before the first case label
387 S MSC40-C. Do not violate constraints
397 S ARR02-C. Explicitly specify array bounds, even if implicitly defined by an initializer
400 S MEM35-C. Allocate sufficient memory for an object
401 S ARR01-C. Do not apply the sizeof operator to a pointer when taking the size of an array
403 S INT34-C. Do not shift an expression by a negative number of bits or by greater than or equal to the number of bits that exist in the operand
404 S STR32-C. Do not pass a non-null-terminated character sequence to a library function that expects a string
404 S MSC40-C. Do not violate constraints
404 S ARR02-C. Explicitly specify array bounds, even if implicitly defined by an initializer
404 S STR11-C. Do not specify the bound of a character array initialized with a string literal
406 S EXP02-C. Be aware of the short-circuit behavior of the logical AND and OR operators
407 S MEM34-C. Only free memory allocated dynamically
408 S EXP02-C. Be aware of the short-circuit behavior of the logical AND and OR operators
412 S MSC15-C. Do not depend on undefined behavior
427 S MSC15-C. Do not depend on undefined behavior
428 S EXP15-C. Do not place a semicolon on the same line as an if, for, or while statement
428 S EXP19-C. Use braces for the body of an if, for, or while statement
432 S INT07-C. Use only explicitly signed or unsigned char type for numeric values
432 S STR00-C. Represent characters using an appropriate type
432 S STR04-C. Use plain char for characters in the basic character set
433 S INT31-C. Ensure that integer conversions do not result in lost or misinterpreted data
433 S EXP13-C. Treat relational and equality operators as if they were nonassociative
433 S INT02-C. Understand integer conversion rules
433 S MSC05-C. Do not manipulate time_t typed values directly
434 S INT31-C. Ensure that integer conversions do not result in lost or misinterpreted data
434 S STR34-C. Cast characters to unsigned char before converting to larger integer sizes
434 S INT02-C. Understand integer conversion rules
435 S FLP34-C. Ensure that floating-point conversions are within range of the new type
435 S FLP36-C. Preserve precision when converting integral values to floating-point type
435 S FLP06-C. Convert integers to floating point for floating-point operations
437 S ARR36-C. Do not subtract or compare two pointers that do not refer to the same array
438 S ARR36-C. Do not subtract or compare two pointers that do not refer to the same array
438 S EXP08-C. Ensure pointer arithmetic is used correctly
439 S INT36-C. Converting a pointer to integer or integer to pointer
440 S INT36-C. Converting a pointer to integer or integer to pointer
446 S INT02-C. Understand integer conversion rules
450 S STR10-C. Do not concatenate different type of string literals
452 S INT02-C. Understand integer conversion rules
452 S INT18-C. Evaluate integer expressions in a larger size before comparing or assigning to that size
457 S INT02-C. Understand integer conversion rules
458 S INT02-C. Understand integer conversion rules
458 S INT07-C. Use only explicitly signed or unsigned char type for numeric values
458 S MSC05-C. Do not manipulate time_t typed values directly
458 S STR04-C. Use plain char for characters in the basic character set
461 S DCL36-C. Do not declare an identifier with conflicting linkage classifications
465 S MSC15-C. Do not depend on undefined behavior
476 S ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
479 S INT34-C. Do not shift an expression by a negative number of bits or by greater than or equal to the number of bits that exist in the operand
480 S EXP43-C. Avoid undefined behavior when using restrict-qualified pointers
481 S MSC40-C. Do not violate constraints
482 S MSC15-C. Do not depend on undefined behavior
483 S MEM34-C. Only free memory allocated dynamically
484 S MEM30-C. Do not access freed memory
484 S MEM01-C. Store a new value in pointers immediately after free()
486 S FIO47-C. Use valid format strings
487 S MEM35-C. Allocate sufficient memory for an object
488 S INT08-C. Verify that all integer values are in range
489 S EXP43-C. Avoid undefined behavior when using restrict-qualified pointers
489 S ARR30-C. Do not form or use out-of-bounds pointers or array subscripts
489 S STR31-C. Guarantee that storage for strings has sufficient space for character data and the null terminator
489 S ARR00-C. Understand how arrays work
493 S INT30-C. Ensure that unsigned integer operations do not wrap
493 S INT32-C. Ensure that operations on signed integers do not result in overflow
493 S INT08-C. Verify that all integer values are in range
493 S INT08-C. Verify that all integer values are in range
494 S INT30-C. Ensure that unsigned integer operations do not wrap
494 S INT32-C. Ensure that operations on signed integers do not result in overflow
496 S DCL31-C. Declare identifiers before using them
496 S EXP37-C. Call functions with the correct number and type of arguments
497 S MSC15-C. Do not depend on undefined behavior
510 S MSC21-C. Use robust loop termination conditions
545 S MSC15-C. Do not depend on undefined behavior
553 S DCL15-C. Declare file-scope objects or functions that do not need external linkage as static
554 S EXP39-C. Do not access a variable through a pointer of an incompatible type
554 S EXP11-C. Do not make assumptions regarding the layout of structures with bit-fields
562 S PRE31-C. Avoid side effects in arguments to unsafe macros
562 S PRE12-C. Do not define unsafe macros
565 S DCL30-C. Declare objects with appropriate storage durations
567 S ARR37-C. Do not add or subtract an integer to a pointer to a non-array object
567 S ARR00-C. Understand how arrays work
568 S PRE04-C. Do not reuse a standard header file name
572 S PRE31-C. Avoid side effects in arguments to unsafe macros
572 S PRE12-C. Do not define unsafe macros
573 S PRE30-C. Do not create a universal character name through concatenation
575 S DCL36-C. Do not declare an identifier with conflicting linkage classifications
576 S EXP37-C. Call functions with the correct number and type of arguments
576 S EXP08-C. Ensure pointer arithmetic is used correctly
578 S EXP03-C. Do not assume the size of a structure is the sum of the sizes of its members
579 S DCL04-C. Do not declare more than one variable per declaration
580 S DCL37-C. Do not declare or define a reserved identifier
580 S MSC40-C. Do not violate constraints
582 S EXP40-C. Do not modify constant objects
584 S INT10-C. Do not assume a positive remainder when using the % operator
585 S INT14-C. Avoid performing bitwise and arithmetic operations on the same data
586 S INT15-C. Use intmax_t or uintmax_t for formatted IO on programmer-defined integer types
587 S MSC15-C. Do not depend on undefined behavior
588 S ENV33-C. Do not call system()
588 S ENV03-C. Sanitize the environment when invoking external programs
589 S FIO47-C. Use valid format strings
589 S DCL11-C. Understand the type issues associated with variadic functions
590 S FIO11-C. Take care when specifying the mode parameter of fopen()
591 S FIO38-C. Do not copy a FILE object
592 S FIO01-C. Be careful using functions that use file names for identification
592 S FIO10-C. Take care when using the rename() function
593 S ERR07-C. Prefer functions that support error checking over equivalent functions that don't
594 S ERR07-C. Prefer functions that support error checking over equivalent functions that don't
600 S STR32-C. Do not pass a non-null-terminated character sequence to a library function that expects a string
602 S STR06-C. Do not assume that strtok() leaves the parse string unchanged
606 S EXP36-C. Do not cast pointers into more strictly aligned pointer types
608 S MSC15-C. Do not depend on undefined behavior
611 S MSC04-C. Use comments consistently and in a readable fashion
612 S MSC40-C. Do not violate constraints
613 S EXP43-C. Avoid undefined behavior when using restrict-qualified pointers
615 S MSC40-C. Do not violate constraints
618 S EXP42-C. Do not compare padding data
618 S FLP37-C. Do not use object representations to compare floating-point values
621 S ARR32-C. Ensure size arguments for variable length arrays are in a valid range
623 S STR05-C. Use pointers to const when referring to string literals
626 S DCL37-C. Do not declare or define a reserved identifier
629 S INT33-C. Ensure that division and remainder operations do not result in divide-by-zero errors
630 S INT09-C. Ensure enumeration constants map to unique values
631 S EXP33-C. Do not read uninitialized memory
634 S DCL09-C. Declare functions that return errno with a return type of errno_t
637 S PRE05-C. Understand macro replacement when concatenating tokens or performing stringification
642 S EXP35-C. Do not modify objects with temporary lifetime
642 S MSC15-C. Do not depend on undefined behavior
644 S MEM34-C. Only free memory allocated dynamically
645 S MEM34-C. Only free memory allocated dynamically
646 S MSC40-C. Do not violate constraints
648 S DCL38-C. Use the correct syntax when declaring a flexible array member
649 S MEM33-C. Allocate and copy structures containing a flexible array member dynamically
650 S MEM33-C. Allocate and copy structures containing a flexible array member dynamically
652 S EXP33-C. Do not read uninitialized memory
652 S EXP34-C. Do not dereference null pointers
653 S EXP44-C. Do not rely on side effects in operands to sizeof, _Alignof, or _Generic
662 S FIO34-C. Distinguish between characters read from a file and EOF or WEOF
663 S STR37-C. Arguments to character-handling functions must be representable as an unsigned char
I J MSC06-C. Beware of compiler optimizations
I J MSC12-C. Detect and remove code that has no effect or is never executed
Partially implemented PRE13-C. Use the Standard predefined macros to test for versions and features.