Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 52 Current »

The setjmp() macro should be invoked from only one of the contexts listed in subclause 7.13.1.1 of the C Standard [ISO/IEC 9899:2011]. Invoking setjmp() outside of one of these contexts results in undefined behavior. (See undefined behavior 125.)

After invoking longjmp(), non-volatile-qualified local objects should not be accessed if their values could have changed since the invocation of setjmp(). Their value in this case is considered indeterminate, and accessing them is undefined behavior. (See undefined behaviors 127 and 10.)

The longjmp() function should never be used to return control to a function that has terminated execution. (See undefined behavior 126.)

Signal masks, floating-point status flags, and the state of open files are not saved by the setjmp() function. If signal masks need to be saved, the POSIX sigsetjmp() function should be used.

This recommendation is related to SIG30-C. Call only asynchronous-safe functions within signal handlers and ENV32-C. All exit handlers must return normally.

Noncompliant Code Example

This noncompliant code example calls setjmp() in an assignment statement, resulting in undefined behavior:

jmp_buf buf;

void f(void) {
  int i = setjmp(buf);
  if (i == 0) {
    g();
  } else {
    /* longjmp was invoked */
  }
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

Compliant Solution

Placing the call to setjmp() in the if statement and, optionally, comparing it with a constant integer removes the undefined behavior, as shown in this compliant solution:

jmp_buf buf;

void f(void) {
  if (setjmp(buf) == 0) {
    g();
  } else {
    /* longjmp was invoked */
  }
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

Noncompliant Code Example

Any attempt to invoke the longjmp() function to transfer control to a function that has completed execution results in undefined behavior:

jmp_buf buf;
unsigned char b[] = {0xe5, 0x06, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00};

int main(void) {
  setup();
  do_stuff();
  return 0;
}

void setup(void) {
  f();
}

void f(void) {
  g();
}

void g(void) {
  if (setjmp(buf) == 0) {
    printf("setjmp() invoked\n");
  } else {
    printf("longjmp() invoked\n");
  }
}

void do_stuff(void) {
  char a[8];
  memcpy(a, b, 8);
  /* ... */
  longjmp(buf, 1);
}

void bad(void) {
  printf("Should not be called!\n");
  exit(1);
}

Implementation Details

Compiled for x86-64 using GCC 4.1.2 on Linux, the preceding example outputs the following when run:

setjmp() invoked
longjmp() invoked
Should not be called!

Because g() has finished executing at the time longjmp() is called, it is no longer on the stack. When do_stuff() is invoked, its stack frame occupies the same memory as the old stack frame of g(). In this case, a was located in the same location as the return address of function g(). The call to memcpy() overwrites the return address, so when longjmp() sends control back to function g(), the function returns to the wrong address (in this case, to function bad()).

If the array b were user specified, the user would be able to set the return address of function g() to any location.

Compliant Solution

The longjmp() function should be used only when the function containing the corresponding setjmp() is guaranteed not to have completed execution, as in the following example:

jmp_buf buf;
unsigned char b[] = {0xe5, 0x06, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00};

int main(void) {
  if (setjmp(buf) == 0) {
    printf("setjmp() invoked\n");
  } else {
    printf("longjmp() invoked\n");
  }
  do_stuff();
  return 0;
}

void do_stuff(void) {
  char a[8];
  memcpy(a, b, 8);
  /* ... */
  longjmp(buf, 1);
}

void bad(void) {
  printf("Should not be called!\n");
  exit(1);
}

There is no risk of overwriting a return address because the stack frame of main() (the function that invoked setjmp()) is still on the stack; so when do_stuff() is invoked, the two stack frames will not overlap.

Noncompliant Code Example

In this noncompliant example, non-volatile-qualified objects local to the function that invoked the corresponding setjmp() have indeterminate values after longjmp() is executed if their value has been changed since the invocation of setjmp():

jmp_buf buf;

void f(void) {
  int i = 0;
  if (setjmp(buf) != 0) {
    printf("%i\n", i);
    /* ... */
  }
  i = 2;
  g();
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

Compliant Solution

If an object local to the function that invoked setjmp() needs to be accessed after longjmp() returns control to the function, the object should be volatile-qualified:

jmp_buf buf;

void f(void) {
  volatile int i = 0;
  if (setjmp(buf) != 0) {
    printf("%i\n", i);
    /* ... */
  }
  i = 2;
  g();
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

Risk Assessment

Recommendation

Severity

Likelihood

Remediation Cost

Priority

Level

MSC22-C

Low

Probable

Medium

P4

L3

Automated Detection

ToolVersionCheckerDescription
CodeSonar
5.1p0

BADFUNC.LONGJMP

BADFUNC.SETJMP

Use of longjmp

Use of setjmp

LDRA tool suite
9.7.1
43 SEnhanced enforcement
Parasoft C/C++test
10.4.2

CERT_C-MSC22-a

The setjmp macro and the longjmp function shall not be used
Polyspace Bug Finder

R2019b

CERT C: Rec. MSC22-CChecks for use of setjmp/longjmp (rec. partially covered)


SonarQube C/C++ Plugin
3.11
S982



  • No labels